8 Brilliant Ways to Clean Your Jewelry

Jewelry has been part of adornment for as long as you can remember. Jewelry stores no doubt have been around for centuries. Whether it is for special events or part of daily clad, jewelry enhances that general appeal of a person. Most of the jewelry are shiny, bright and expensive and will require a lot of care to maintain the sparkle for as long as it can. This will mean that you have to know the methods of cleaning the jewelry and how to store them. Most jewelry stores have how-to-guides on how to maintain jewelry. Here are some tips that will help you in maintaining the appearance of your jewelry:

  1. Soaking in cold water with ammonia solution

Mix in a cup or bowl half water and household ammonia. Soak the jewelry in the cup for about 30 minutes. Ensure that you do not do this overnight or for a long period of time. After soaking remove the jewelry gentle and clean the back and the front of the setting preferably with an eyebrow brush. Swish the jewelry in the solution again then drain it on a clean tissue. Be careful however not to use this method for soft gems or strung jewelry like pearls or ivory. Ensure that you read the instructions given by the jewelry store for cleaning and other important factors.

  1. Using the quick dip method

This is good for jewelry that is stocked in the jewelry stores. Most jewelry stores use this for commercial cleaning of their jewelry. The kind of cleaners that are used in this method may vary and hence the need for you read the instructions that are given keenly. Do not use any cleaner for any jewelry unless you seek clarification from the jewelry store.

  1. Detergent bath

You can mix some mild detergent with warm water in a bowl. Jewelry is immersed and gently brushed on the front and the back setting with some eyebrow brush. It is then rinsed under running warm water. You can place the jewelry in a tea strainer for safety. Gently part them dry with lintel cloth. Jewelry stores do not advice this for soft gems or on any jewelry that is strung.

  1. Using ultrasonic cleaners

These are small machines that you will get in the market or at the jewelrystores. The machine uses high frequency turbulence. This is used to clean jewelry soaking in a metal cup of detergent or water. It is important to read the instructions given at the jewelry store on specific jewelry on which this method id not advised. Some jewelry stores discourage the use of the ultrasonic machines for cleaning diamonds.  Therefore before going into the expense of buying this machine,  it is good to consult the jewelry store attendants.

For more on ultrasonic cleaning option, you can read this article and get some ideas.


  1. Using aluminum foil

This is a DIY way of cleaning your jewelry. Fill a small bowl lined with aluminum foil with hot water mixed with bleach free powdered laundry detergent. Immerse the jewelry into the solution and let it soak for about one minute. Rinse the jewelry well and air-dry it. Jewelry stores would advise this method mostly for silver ware jewelry. This method used the chemical properties of ion exchange and will enable you keep your silver jewelry sparkling for longer.

  1. Using baking soda

Used mostly for cleaning silver jewelry. Most silver ware bought from jewelry stores will built up tarnish with time if they are not taken care of. One of the ways of cleaning it is using baking soda. Make a thick paste using ¼ cup of baking soda and 2 teaspoons of water. Using a damp sponge gently rub on the jewelry. Rinse and buff dry. For gold jewelry, cover the jewelry with a thin film of baking soda and pour some vinegar over it then rinse it clean. This technique is not however used for pearls or gemstones. You can find help if you need it by asking a jeweler.

  1. Using beer – not dark ale though!

This method is used to get back the sparkle of solid gold that does not have any gemstones. Pour a bit of beer on solid gold and rings holding are using a piece of cloth if you can. Rub it gentle over the gold piece and then use another cloth to dry it. This is DIY (Do-It-Yourself) technique and most jewelry stores advise using it on specific jewels only.

  1. Soaking in denture tablets

Most of the diamonds bought in jewelry stores lose their sparkle over time. To regain the old sparkle, you can soak the diamond in a solution of denture tablet mixed with water for a few minutes. Remove the diamond from the solution and rinse it to reveal the old sparkle.


If you are a jeweler and have your own blog in addition to selling your jewelry online, make sure you make yourself visible to those searching. It is difficult these days to compete with the larger stores and companies. You will need a good website and marketing strategy. It’s helpful to use businesses such as Oxbow SEO (see their social media examples which are a good list to copy when you make your own) to help make your products, tips and resources  available to as many people as possible!